separate and dry plastics

Agglomeration Machines

Agglomerator Machines

Agglomeration machines are a cost efficent way of recycling thin walled polymers.

Agglomeration machines are used for physically transform loose plastic material into chips suitable to be fed the hopper of an extruder.

Agglomerator is a cylinder with five to nine stationary and two rotating blades at the bottom which create friction and heat.

This process causes material to reach to the softening point. In this stage, operator add some water to create a kind of shock.

After water evaporates, material comes out from pneumatic operated discharge door as chips.

Agglomerators can be used as material drier and densifier. Netplasmak manufactures agglomerators in various drum sizes.

Ø600-Ø800-Ø900-Ø1000-Ø1100-Ø1200-Ø1300-Ø1400- Ø1500mm drum sizes. The capacity is between 100kg/hour-1000kg/hour.

Model No. NPA60 NPA80 NPA100 NPA120 NPA130 NPA140 NPA150
Body Diameter (mm) 60 80 100 120 130 140 150
Stationary Blades 2 2 4 4 4 4 4
Fixed Blades 5 5 5 – 7 5 – 7 5 – 7 7 – 9 7 – 9
Weight (kg) 2000 2500 4000 4500 6000 7000 8000
Drive (kW) 37-45 55 75-90 90-110 110-132 132-160 160-200
Capacity (kg/h) 50-120 120-220 200-350 350-1000 350-500 500-700 600-1000

Motor power and other properties of plastic agglomerators are customized depending on plastic material types to be recycled.

0
0
0
s2smodern